Belkin F5D7230au4P User Manual download pdf (Page 123)

121

Troubleshooting

121

section

Problem:

I am having difficulty setting up Wired Equivalent Privacy (WEP)

security on a Belkin Router or Belkin Access Point

Solution

Log into your Wireless Router or Access Point.

Open your web browser and type in IP address of the Wireless

Router or Access Point. (The Router default is 192.168.2.1, the

802.11g Access Point is 192.168.2.254 ). Log into your router

by clicking on the “Login” button in the top right-hand corner

of the screen. You will be asked to enter your password. If you

never set a password, leave the password field blank and click

“Submit”.

Click the “Wireless” tab on the left of your screen. Select

the “Encryption” or “Security” tab to get to the security

settings page.

2. Select “128-bit WEP” from the drop-down menu.

3. After selecting your WEP encryption mode, you can type in

your hex WEP key manually, or you can type in a passphrase

in the “Passphrase” field and click “Generate” to create a WEP

key from the passphrase. Click “Apply Changes” to finish. You

must now set all of your clients to match these settings. A hex

(hexadecimal) key is a mixture of numbers and letters from A-F

and 0-9. For 128-bit WEP, you need to enter 26 hex keys.

For example:

C3030FAF4BB2C3D44BC3D4E7E4 = 128-bit key

4. Click “Apply Changes” to finish. Encryption in the Wireless

Router is now set. Each of your computers on your wireless

network will now need to be configured with the same

security settings.

1 2 ... 118 119 120 121 122 123 124 125 126 127 128 ... 135 136

No comments

Belkin F5D7230au4P User Manual Page 123