Belkin F5D7230au4P User Manual download pdf (Page 80)

7978

Using the Web-Based Advanced User Interface

7978

Using the Web-Based Advanced User Interface

Using the Access Point Mode

Note: This advanced feature should be employed by advanced users

only. The Router can be configured to work as a wireless network

access point. Using this mode will defeat the NAT IP sharing feature

and DHCP server. In Access Point (AP) mode, the Router will need to

be configured with an IP address that is in the same subnet as the

rest of the network that you will bridge to. The default IP address

is 192.168.2.254 and subnet mask is 255.255.255.0. These can be

customised for your need.

1. Enable the AP mode my selecting “Enable” in the “Use as Access

Point only” page. When you select this option, you will be able to

change the IP settings.

2. Set your IP settings to match your network. Click “Apply

Changes”.

3. Connect a cable from the WAN port on the Router to your

existing network.

The Router is now acting as an access point. To access the Router’s

advanced user interface again, type the IP address you specified into

your browser’s navigation bar. You can set the encryption settings,

MAC address filtering, SSID, and channel normally.

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 135 136

No comments

Belkin F5D7230au4P User Manual Page 80