Belkin F5D7230au4P User Manual download pdf (Page 105)

103

Manually Configuring Computer Network Settings

103

section

In order for your computer to properly communicate with your Router, you will

need to change your PC’s TCP/IP settings to DHCP.

Manually Configuring Network Adapters in Windows 2000, NT, or XP

Click “Start”, “Settings”, then “Control Panel”.

2. Double-click on the “Network and dial-up connections” icon

(Windows 2000) or the “Network” icon (Windows XP).

3. Right-click on the “Local Area Connection” associated with your

network adapter and select “Properties” from the drop-down menu.

4. In the “Local Area Connection Properties” window, click “Internet

Protocol (TCP/IP)” and click the “Properties” button. The following

screen will appear:

5. If “Use the following IP address” (2) is selected, your Router will

need to be set up for a static IP connection type. Write the address

information the table below. You will need to enter this information

into the Router.

6. If not already selected, select “Obtain an IP address automatically”

(1) and “Obtain DNS server address automatically” (3). Click “OK”.

Your network adapter(s) are now configured for use with the Router.

(1)

(2)

(3)

Note: The print-server function of this router is not compatible with Mac

operating systems.

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 135 136

No comments

Belkin F5D7230au4P User Manual Page 105