Belkin P75125UK User Manual download pdf (Page 11)

Connecting your Router

Connecting your ADSL Line

Connection for the Router to the ADSL line varies by country and

region. Typically it involves a microfilter or a microfilter with built-

in splitter to allow simultaneous use of ADSL service and telephone

service on the same telephone line. Please read the following steps

carefully and select appropriate method.

1. If your telephone service and ADSL service are on the same

telephone line, ADSL microfilters are needed for each telephone

and device, such as answering machine, fax machine, and caller

ID display. Additional splitters may be used to separate telephone

lines for telephone and the Router.

Note: Do not connect the ADSL microfilter between the wall jack

and the Router—this will prevent ADSL service from reaching

the modem.

2. If your telephone service and ADSL service are on the same

telephone line and you are using an ADSL microfilter with built-in

splitter, connect the splitter to the telephone wall jack providing

ADSL service. Then, connect the telephone cord from the ADSL

microfilter RJ11 port generally labeled “DSL” to the gray RJ11

port labeled “DSL line” on the back of your Router. Connect

telephony device to the other port on the ADSL splitter commonly

labeled “Phone”. An additional ADSL microfilter is needed for

another telephone and device on the same line.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 91 92

No comments

Belkin P75125UK User Manual Page 11