Belkin P75125UK User Manual download pdf (Page 19)

1716

Setting Up your Computers

1716

Setting Up your Computers

4. Select the “TCP/IP” tab (3). Next to “Configure” (4), you should

see “Manually” or “Using DHCP”. If you do not, check the

PPPoE tab (5) to make sure that “Connect using PPPoE” is NOT

selected. If it is, you will need to configure your Router for a

PPPoE connection type using your user name and password.

5. If “Manually” is selected, your Router will need to be set up for

a static IP connection type. Write the address information in

the table below. You will need to enter this information into the

Router.

6. If not already selected, select “Using DHCP” next to “Configure”

(4), then click “Apply Now”.

Your network adapter(s) are now configured for use with the Router.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 91 92

No comments

Belkin P75125UK User Manual Page 19