Belkin P75125UK User Manual download pdf (Page 74)

Troubleshooting

section

Problem:

I am having difficulty setting up Wi-Fi Protected Access (WPA)

security on a Belkin Wireless Router or Belkin Access Point for a

home network.

Solution:

From the “Security Mode” drop-down menu, select “WPA-PSK

(no server)”.

2. For “Encryption Technique”, select “TKIP” or “AES”. This setting

will have to be identical on the clients that you set up.

3. Enter your pre-shared key. This can be from eight to 63

characters and can be letters, numbers, or symbols or spaces.

This same key must be used on all of the clients that you set up.

For example, your PSK might be something like: “Smith family

network key”.

4. Click “Apply Changes” to finish. You must now set all clients to

match these settings.

Problem:

I am having difficulty setting up Wi-Fi Protected Access (WPA)

security on a Belkin Wireless Router or Belkin Access Point for

a business.

Solution:

If your network uses a radius server to distribute keys to the clients,

use this setting. This is typically used in a business environment.

1. From the “Security Mode” drop-down menu, select “WPA

(with server)”.

2. For “Encryption Technique”, select “TKIP” or “AES”. This setting

will have to be identical on the clients that you set up.

3. Enter the IP address of the radius server into the “Radius

Server” fields.

4. Enter the radius key into the “Radius Key” field.

5. Enter the key interval. Key interval is how often the keys are

distributed (in packets).

6. Click “Apply Changes” to finish. You must now set all clients to

match these settings.

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 91 92

No comments

Belkin P75125UK User Manual Page 74