Belkin P75125UK User Manual download pdf (Page 36)

Manually Configuring your Router

section

Setting your Connection Type to Modem Only (Disable

Internet Sharing)

In this mode, the Router simply acts as a bridge passing packets

across the DSL port. It requires additional software to be installed on

your computers in order to access the Internet.

1. VPI/VCI - Enter your Virtual Path Identifier (VPI) and Virtual Circuit

Identifier (VCI) parameter here. (Assigned by your ISP).

DNS (Domain Name Server) Settings

A “Domain Name Server” is a server located on the Internet that

translates Universal Resource Links (URLs) like “www.belkin.com” to

IP addresses. Many ISPs do not require you to enter this information

into the Router. The “Automatic from ISP” box (1) should be checked

if your ISP did not give you a specific DNS address. If you are using a

static IP connection type, then you may need to enter a specific DNS

address and secondary DNS address for your connection to work

properly. If your connection type is dynamic or PPPoE, it is likely that

you do not have to enter a DNS address. Leave the “Automatic from

ISP” box checked. To enter the DNS address settings, uncheck the

“Automatic from ISP” box and enter your DNS entries in the spaces

provided. Click “Apply Changes” (2) to save the settings.

(1)

(2)

(1)

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 91 92

No comments

Belkin P75125UK User Manual Page 36