Belkin GO N300 DB User Manual download pdf (Page 14)

ADVANCED SETTINGS

We recommend accepting the default values here, which will

mirror your main network. However, if you wish to change

settings for the Extended Network, you can do so here.

The screen is arranged in two columns, one for your 2.4GHz

Extended Network and the second for the 5GHz Extended Network.

For each network, you may configure the following:

Network Name (SSID)

This is the name of your extended wireless Range Extender as it

will show up when you try to connect to it from a laptop, tablet, etc.

Broadcast SSID

Note: This advanced feature should be employed by advanced users

only. For security, you can choose not to broadcast your extended

network’s SSID. Doing so will keep your network name hidden

from computers that are scanning for the presence of wireless

networks. To turn off the broadcast of the SSID, remove the check

mark from the box next to “Broadcast SSID”, and then click “Apply

Changes.” The change is immediate. Each wireless computer or

device now needs to be set to connect to your specific SSID. Refer

to the documentation of your computer, tablet, or other device.

Extended Network Settings

These options enable you to configure your Extended Networks.

SSID Settings

This screen enables you to configure the SSID, security,

and other features of your Extended Network.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 26 27

No comments

Belkin GO N300 DB User Manual Page 14