Belkin F5U624 User Manual download pdf (Page 6)

INSTALLATION

Self-powered mode

1. Plug AC adapter into a 110V AC outlet, then plug the adapter cord

into the Hub.

2. Connect the Hub to an available FireWire port on your computer. If you

are connecting the Hub to a 6-pin FireWire port, use a 6-pin to 9-pin

FireWire cable. If you are connecting the Hub to a 9-pin FireWire 800 port,

use the provided 9-pin bilingual to 9-pin bilingual FireWire 800 cable.

3. Connect your FireWire devices to the Hub using the cable supplied with

each device. If your device did not include a cable, or the cable has been

lost, please visit belkin.com, or your local retailer to obtain a quality

Belkin replacement cable.

4. Place the Hub in a convenient location on your desktop.

The Hub is now ready for use.

Bus-powered mode

1. Connect the Hub to an available FireWire port on your computer. If you

are connecting the Hub to a 6-pin FireWire port, use a 6-pin to 9-pin

FireWire cable. If you are connecting the Hub to a 9-pin FireWire 800 port,

use the provided 9-pin bilingual to 9-pin bilingual FireWire 800 cable.

2. Connect your FireWire devices to the Hub using the cable supplied with

each device. If your device did not include a cable, or the cable has been

lost, please visit belkin.com, or your local retailer to obtain a quality

Belkin replacement cable.

3. Place the Hub in a convenient location on your desktop.

The Hub is now ready for use.

Note: To use the Belkin FireWire 800 3-Port Hub, your computer must be

equipped with a built-in FireWire host adapter, or with a FireWire host adapter

upgrade card. Make sure your host adapter is properly installed and recognized

by your operating system before installing the Hub

1 2 3 4 5 6 7 8 9 10 11 ... 47 48

No comments

Belkin F5U624 User Manual Page 6