Belkin F5D7231-4P User Manual download pdf (Page 105)

102

Manually Configuring Computer Network Settings

103

section

Set up the computer that is connected to the cable or DSL modem

FIRST using these steps. You can also use these steps to add

computers to your Router after the Router has been set up to connect

to the Internet.

Manually Configuring Network Adapters in Mac OS

up to 9.x

In order for your computer to properly communicate with your Router,

you will need to change your Mac’s TCP/IP settings to DHCP.

1. Pull down the Apple menu. Select “Control Panels” and

select “TCP/IP”.

2. You will see the TCP/IP control panel. Select “Ethernet Built-In”

or “Ethernet” in the “Connect via:” drop-down menu (1).

3. Next to “Configure” (2), if “Manually” is selected, your Router

will need to be set up for a static IP connection type. Write the

address information in the table below. You will need to enter this

information into the Router.

(1)

(2)

4. If not already set, at “Configure:”, choose “Using DHCP

Server”. This will tell the computer to obtain an IP address

from the Router.

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 145 146

No comments

Belkin F5D7231-4P User Manual Page 105