Belkin F5D6051 User Manual download pdf (Page 34)

Troubleshooting

Installation CD-ROM does not start Setup Utility

If the CD-ROM does not start the Setup Utility automatically, it

could be that the computer is running other applications that are

interfering with the CD drive.

If the Setup Utility screen does not appear within 15-20 seconds,

open up your CD-ROM drive by double-clicking on the “My

Computer” icon. Next, double-click on the CD-ROM drive that the

Installation CD has been placed in to start the installation.

Power LED does not come ON; Adapter is not working

If the LED indicators are not ON, the problem may be that the

Adapter is not connected or installed properly.

Verify that the Adapter is plugged firmly into the USB slot of your

computer. Check to see that the drivers for the Card have been

installed. Right click on the “My Computer” icon on your desktop.

Choose “Properties” and navigate to the “Device Manager” and

see if your USB device is listed without any errors. If an error is

indicated contact Belkin Technical Support.

Link LED is blinking slowly; Cannot connect to a wireless

network or the Internet

If your Adapter appears to be functioning properly, but you

cannot connect to a network or you have a red wireless icon

at the bottom of your screen, the problem may be that there is

a mismatch between the network name (SSID) settings in your

wireless network properties.

Check the SSID settings to see if they match. The SSID is

case-sensitive and the spelling on each computer must be

exactly the same in order for the Adapter to connect to the

Wireless Router or Access Point

Note: To check the SSID settings or look for an available

network, double-click the Signal Indicator icon to bring up the

“Wireless Networks” screen. Click “Add” if you do not see the

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 40 41 42

No comments

Belkin F5D6051 User Manual Page 34