Belkin Powerline AV Networking Adapters User Manual download pdf (Page 7)

Powerline AV Networking Adapter

SECTIONSTable of Contents 1 3 4

INSTALLING AND SETTING UP THE ADAPTERS

Overview

Installation of the Powerline AV Networking Adapter takes only seconds

and does not require setting up long wires throughout the house. Simply

plug the units directly into any available wall outlet and connect to any

device with an Ethernet port. Users have the option to randomly change

the security password for their powerline network.

Hardware Setup

1. Plug your network cable into the device’s RJ45 network

adapter port.

2. Plug the other end of your network cable into the RJ45 port located

at the back of the Adapter.

3. Plug the power cable or wall adapter into the power connector at

the back of the Adapter.

4. Insert the power plug of your power cable or wall adapter directly

into a power outlet in the wall.

NOTE: Do not plug the device into a UPS or power strip with

surge protection as they may filter the powerline signal.

5. Repeat this process for the second Adapter.

1 2 3 4 5 6 7 8 9 10 11 12 13 14

No comments

Belkin Powerline AV Networking Adapters User Manual Page 7