Belkin P74080 User Manual

P74080 F5U209Hi-Speed USB 2.0External Drive EnclosureUser ManualP74080-F5U209-man_8-02.qxd 8/26/02 12:36 PM Page a

ASSEMBLING YOUR DRIVE ENCLOSURE68. Insert the mounting tabs on the free end of the front panelinto the second side rail, and hook the side rail onto t

ASSEMBLING YOUR DRIVE ENCLOSURE710. Plug the square-shaped connector of the USB cable intothe USB port on the rear panel of the External Drive.11. Plu

DRIVER INSTALLATION 8Windows 98 SE1. Insert the installation CD into your CD-ROM drive.2. Open the Install CD.3. Run the “TPPINST.EXE” to install the

DRIVER INSTALLATION 9Note: If the new drive does not appear in My Computer, youmay need to partition and format the drive. Please refer to the“Format

SAFE REMOVAL OF THE USBDISK FROM WINDOWS10Windows 981. Click the green “Unplug or Eject Hardware” icon in thesystem tray and select the device that yo

FORMAT THE USB 2.0 EXTERNAL DRIVE11Format under Windows 98/Me1. Boot-up the computer into the Windows operating system.2. Plug in your External Drive.

FORMAT THE USB 2.0 EXTERNAL DRIVE125. Select “Disk Drives”. Your new hard disk will appear in thehard drive list (in this case as “Toshiba 1924FCV”).

FORMAT THE USB 2.0 EXTERNAL DRIVE13DOS Method (Recommended for Advanced Users Only) 1. Click on “Start”, and choose “Programs”. Select “MSDOS”.2. At t

FORMAT THE USB 2.0 EXTERNAL DRIVE14IMPORTANTBe sure that you select option 5 and change the “Current Fixed Disk” from “Disk 1” to the disk number assi

FORMAT THE USB 2.0 EXTERNAL DRIVE15Note: If you are viewing the Control Panel in classic mode,proceed directly to “Administrative Tools”.2. Click on “

P74080-F5U209-man_8-02.qxd 8/26/02 12:36 PM Page b

INFORMATIONFCC StatementDECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITYWe, Belkin Corporation, of 501 West Walnut Street, C

© 2002 Belkin Corporation. All rights reserved.All trade names are registered trademarks of respective manufacturers listed.P74080Belkin Components B.

TABLE OF CONTENTSIntroduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1System Requirements . . . . . . . . .

P74080-F5U209-man_8-02.qxd 8/26/02 12:36 PM Page d

The Hi-Speed USB 2.0 External Drive Enclosure (the External Drive) isa portable compact storage drive that incorporates the USB 2.0(Universal Serial B

SYSTEM REQUIREMENTS2HardwareNotebook and desktop computer with USB 1.0 or USB 2.0 portOperating SystemWindows®98 SE, Me, 2000, or XP P74080-F5U209-man

ASSEMBLING YOUR DRIVE ENCLOSURE31. Remove top of the External Drive.2. If you are installing a 31/2-inch hard drive, check to makesure your drive is s

ASSEMBLING YOUR DRIVE ENCLOSURE4Note: There are four fine-threaded screws, and four course-threaded screws included with your Hi-Speed ExternalDrive E

ASSEMBLING YOUR DRIVE ENCLOSURE6. Hook the first side rail around the front edge of theExternal Drive and press the rail into the six rectangular-shap