Belkin f5d7230-4 User Manual download pdf (Page 16)

Connecting and Configuring your Router

Verify the contents of your box. You should have the following:

• Belkin Wireless G Router

• Quick Installation Guide

• Belkin Easy Install Wizard Software CD with User Manual

• RJ45 Ethernet Networking Cable (for connection of the

Router to the computer)

• Power Supply

Modem Requirements

Your cable or DSL modem must be equipped with an RJ45 Ethernet port.

Many modems have both an RJ45 Ethernet port and a USB connection.

If you have a modem with both Ethernet and USB, and are using the USB

connection at this time, you will be instructed to use the RJ45 Ethernet port

during the installation procedure. If your modem has only a USB port, you

can request a different type of modem from your ISP, or you can, in some

cases, purchase a modem that has an RJ45 Ethernet port on it.

Ethernet USB

ALWAYS INSTALL YOUR ROUTER FIRST! IF YOU ARE INSTALLING

NUMEROUS NETWORK DEVICES FOR THE FIRST TIME, IT IS

IMPORTANT THAT YOUR ROUTER IS CONNECTED AND RUNNING

BEFORE ATTEMPTING TO INSTALL OTHER NETWORK COMPONENTS

SUCH AS NOTEBOOK CARDS AND DESKTOP CARDS.

Setup Assistant

Belkin has provided our Setup Assistant software to make installing your

Router a simple and easy task. You can use it to get your Router up and

running in minutes. The Setup Assistant requires that your Windows 2000 or

XP computer be connected directly to your cable or DSL modem and that

the Internet connection is active and working at the time of installation.

If it is not, you must use the “Alternate Setup Method” section of this User

Manual to configure your Router. Additionally, if you are using an operating

system other than Windows 2000 or XP, you must set up the Router using the

“Alternate Setup Method” section of this User Manual.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 123 124

No comments

Belkin f5d7230-4 User Manual Page 16