Belkin F1DA104T User Manual

13™OmniViewPRO2 Series KVM SwitchPRO2 SeriesUser ManualF1DA104TF1DA108TF1DA116T

8Pre-ConfigurationWhere to Place the PRO2:The enclosure of the PRO2 is designed for standalone or rack-mount configuration. The 8- and 16-port PRO2s a

9INSTALLATIONStep-by-Step Installation GuideCautions and Warnings:Before attempting to connect anything to the PRO2 or your computer(s),please ensure

10INSTALLATIONYour PRO2 is now mounted securely into the bracket and you are ready toconnect cables to the back of the unit. Note for Belkin PRO Serie

11INSTALLATIONConnect the Computer:PS/2 Installation1. Using an OmniView KVM Cable (Belkin part# F3X1105-XX or F3X1835-XX-GLD), plug in the male VGA c

12INSTALLATION1. Using a USB KVM Cable (Belkin part# F3X1962-XX or F3X1895-XX-GLD),plug the male VGA connector into the VGA port on the computer.Conne

13INSTALLATIONBANK DIP Switch Configuration ChartDIP SWITCH# BANK ADDRESS123456ON ON ON ON ON ON BANK 00 MASTER (default)ON ON OFF ON ON ON BANK 01 S

14InstallationBefore You Begin:1. Make sure that all computers are powered off and that each PRO2 hasbeen assigned a unique BANK address.2. Place Mast

15Example of Daisy-Chain Configuration:Connecting the Computers:9. Connect all computers to the Master and Slave switches. Refer to “Single PRO2 Ins

16USING YOUR PRO2Powering up the SystemsOnce all cables have been connected, power up the computers that areattached to the PRO2. All computers can be

17Selecting a Computer Using Keyboard Hot Key Commands:Switch to the next or previous port with simple keyboard key sequences using the “Scroll Lock”

TABLE OF CONTENTSOverviewFeature Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2Equipment Requirements .

18USING YOUR KVM SWITCHWith a daisy-chain switch configuration, you can switch directly to any porton any BANK by pressing “Scroll Lock”, “Scroll Lock

19first active computer will be displayed on the Console monitor. Use the direct-access port selectors to go to the desired computer on BANK 02. The

20USING YOUR PRO2On-Screen Display Menu Control:To access the On-Screen Display (OSD) menu, press “Scroll Lock”, “ScrollLock”, and the space bar. Imme

21AutoScan Time:Specifies the amount of time the PRO2 remains on a port before switching to the next port while in AutoScan mode. You may select diffe

22USING YOUR PRO2Connecting Computers: 1. Connect a keyboard, monitor, and mouse to the computer you prepared forfirmware update. It must run Windows

23BELKIN KVM SWITCHES AND ACCESSORIESOmniView KVM SwitchesOmniView E Series. This series of desktop OmniView KVM Switches allowsyou to control two or

24BELKIN KVM SWITCHES AND ACCESSORIESF1DS102P SOHO Series 2-Port KVM Switch with Audio PS/2 OnlyF1DS104P SOHO Series 4-Port KVM Switch with Audio PS

25BELKIN KVM SWITCHES AND ACCESSORIESOmniView All-In-One KVM CablesOmniView All-In-One KVM Cables provide you with the quality connectionsnecessary to

26BELKIN KVM SWITCHES AND ACCESSORIESOmniView Accessories and AdaptersBelkin KVM technology includes various accessories and adapters to completeyour

27PRO2 SERIES FAQsQ: What operating systems does the PRO2 support? A: The PRO2 will support any operating system that runs on a PS/2 and USB platfor

1™OmniViewCongratulations on your purchase of this BelkinOmniView PRO2 Series KVMSwitch (the PRO2). Our diverseline of KVM solutions exemplifies the B

28PRO2 SERIES FAQsQ: How far can the computer be from the PRO2? A: When using PS/2 connections, the PRO2 can be up to 25 feet away fromyour computer.

29PRO2 SERIES FAQsQ: Does the PRO2 require an AC adapter?A: Yes, the PRO2 requires a 12-Volt DC, 1-Amp power adapter in order tofunction properly. Q:

30TROUBLESHOOTINGGeneralMy computer does not boot when connected to the PRO2 but works finewhen I connect the keyboard, video, and mouse directly to t

31TROUBLESHOOTINGKeyboard The computer does not detect a keyboard and I get a keyboard error reported at boot up.• Check that the keyboard cable betwe

32TROUBLESHOOTINGThe mouse is not detected at boot-up.• Check the cables and make sure that they are inserted correctly.The computer boots up, but the

33TROUBLESHOOTINGUSB I am connecting my computer to the USB PRO2 via USB and my keyboardand mouse do not work.• Prior to connecting the USB PRO2, make

34WARRANTY, FCC, CE, ICES STATEMENTFCC StatementDECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITYWe, Belkin Components, of 50

Belkin Components B.V.Starparc Building • Boeing Avenue 3331119 PH Schiphol-Rijk • The NetherlandsTel: +31 (0) 20 654 7300Fax: +31 (0) 20 654 7349Belk

2OVERVIEWThe PRO2s allow you to control up to a maximum of 256 computers with onekeyboard, monitor, and mouse. They support PS/2 input devices (keyboa

3OVERVIEWFront-Panel Push Button:Direct-access port selectors, located conveniently on the front panel of thePRO2, allow for simple, manual port-selec

4available in both USB and PS/2 connector types. The following cables are recommended for your PRO2:OmniView All-In-One PRO Series PlusF3X1105-XX (PS/

5OVERVIEWSide View of the PRO2:BANK DIP switch (may be located on theback in some models) BANK1ONON23456 1234FLASHFLASH DIP switch (may be located on

6OVERVIEWUSBUSB0403Direct-access port selectorLED for selectedport identificationManual BANKscroll buttons7-segment LED for selected BANK identificati

7OVERVIEWSpecificationsPart No.: F1DA104T, F1DA108T & F1DA116T Power: 12-Volt DC, 1-Amp power adapter with center-pin positive polarityDaisy-Chain